Witter Cycle Carrier 4×4

Description

A 3/4 cycle carrier for vehicles with a rear mounted spare wheel with a larger overhang (up to 200mm), Maximum capacity 65kg.

Features:

• Fitting and removal in seconds – no tools required (see notes)
• Simply clicks into place
• Carry cycles and tow at the same time (see notes)
• Fully padded rubber carrier arms and frame rest.
• Heavy duty restraints and reinforced strap to ensure cycle safety
• Provision for attachment of lock or cable for cycle security
• Includes 3 elastic cycle attachment straps

CHOOSING THE RIGHT CYCLE CARRIER if you have a rear door mounted spare wheel

ZX108 is required if dimension ‘X’ is more than 110mm & Less than 200mm
ZX98 is required if dimension ‘X’ is more than 10mm & Less than 110mm
No Witter cycle carrier is available if dimension ‘X’ is more than 200mm
Please call us if you have a low number plate which may be obscured by the cycle rack mounting plate
Note – A light board should be used if the number plate or lights are obscured when the cycles are fitted.

Notes:

• No tools required after initial installation of lower support bracket.
• The recommended maximum noseload of the vehicle must not be exceeded
• Cycle carrier can carry up to four cycles depending on the size and type of cycles
• The number of cycles carried when towing is dependent on the length of trailer/caravan A frame, position of jockey wheel and brake handle, and size and the type of cycles.  The user is responsible for ensuring that there is sufficient clearance to avoid contact between the cycles and the trailer/caravan.

Please supply details of your vehicle so that we can supply the correct cycle carrier.