Ifor Williams Copy Knott Brake Shoe Kit 200×50

Description

Copy 200 x 50 brake shoes and springs for Knott brakes for one axle, two sets of shoes for Ifor Williams trailers.

200mm Diameter Drum, 50mm Brake Shoe Width, IWT part no. P000320.

Generally, these OEM compatible brake shoes will fit all Ifor Williams Horse boxes with Knott Avonride running gear, as well as many other Ifor Williams trailers.

Any Ifor Williams trailer built after 1999 with a grey hub cab (grease or dust cap) and has its wheels held on by 4 wheel bolts or nuts will be fitted with these brake shoes or the Knott originals. If you are in any doubt or would like to be absolutely sure, it may be worth removing a drum and measuring the brake shoes. Please contact us if you need any assistance.

The models of Ifor Williams Trailers fitted with 200 x 50 brake shoes (from September 1992) are as follows:
Goods Trailers – GD64, GD84, GD85, GD105, GD106 with 13″ wheels, GD125, GD126 with 13″ wheels, Q6B, Q7B & Q8B
Van Trailers – BV84, BV85, BV105 & BV125
Car Transporters – CT115, CT136SA, CT136
Flatbed Trailers – LM85G, LM105G & LM125G excluding HD models, all Eurolight Range and all the LT Range
Plant Trailers – GD106 & GD126 with 165/R13 Wheels, GX84, GX85, GX105, GH64, GH94, GH94BT & GH146.
Horse Boxes – HB401, HB403, HB505, HB506, HB510 & HB511
Livestock Trailers – most TA models (excluding HD models), P6B, P7B & P8B
Tiltbed Trailers – all TB range with 10″ wheels.
Tipping Trailer – TT2515

It is recommended that brakes shoes on the same axle are replaced at the same time to maintain even braking.

Kit Includes:
2 x Brakes Shoe
2 x Brake shoe with carrier
2 x Shoe retaining spring.
4 x Tension spring