Bearing Kit for RTN 911 and 912 Hub

Name: Bearing Kit for RTN 911 and 912 Hub
Brand: Daxara
SKU: WBK150
Availability: InStock

£32.29

Sealed for Life bearing set for RTN 911 & RTN 912 hub fitted on many unbraked trailers.

When removing or fitting one piece sealed bearings it is extremely important that you work carefully and keep everything clean in order to ensure efficient operation and to maintain safety. To ensure that the bearings operate properly it is essential that the correct tools and methods are used to fit them. Installation should be carried out under clean conditions. Do not unwrap bearings until you are ready to fit them.

Removal

Place chocks under at least one wheel of the vehicle.
Loosen wheel bolts before jacking up the vehicle.
Jack up the vehicle and secure on axle stands.
Remove the wheel nuts and wheel.
Remove the dustcap.
Remove the hub or brake drum.
Lay hub or brake drum on flat, clean surface.
Remove the circlip(s).
Ideally, push out the bearing squarely using a hydraulic press and suitable mandrel taking care not to damage the machined surfaces of the hub or brake drum. The sealed bearing is now to be scrapped as it is no longer fit for service.

Fitting

WARNING: Keep the two inner half rings of the new bearing held together otherwise the bearing could become damaged and not fit for use.
Push the new bearing squarely all the way into the hub or brake drum ideally using a hydraulic press and suitable mandrel. NOTE: The force must be applied only on the outer ring of the bearing otherwise the bearing can be damaged and unfit for use.
Fit the circlip(s) ensuring it is fully engaged in the machined groove
Refit the hub or drum and a NEW flanged nut and tighten to a torque as specified below.
Refit the wheel and wheel bolts or wheel nuts
Lower vehicle and tighten wheel bolts N S W E to correct torque.
Check and adjust brakes where necessary

Hub Nut Torque Settings

These hub and drum 'one shot' nut torque settings are given as a guide, please check your trailer or caravan handbook, axle handbook or under the hub cap for the correct torque setting.

Hub/Drum Make	Torque Setting
RTN	280Nm
Al-ko	280-300Nm
Knott-Avonride	280Nm
Ifor Williams	350Nm
BPW (using M24 Nut)	280Nm
BPW (using M27 Nut)	330Nm

Our Ref: WBK150 Categories: Bearing & Bearing Kits, Drum & Hub Spares

Description

Sealed for Life bearing set for RTN 911 & RTN 912 hub fitted on many unbraked trailers. The hub can be identified by the marking on the rear of the casting, either ‘912’ or ‘911’.

Kit includes one-piece sealed for life bearing (replacing bearing marked 633313, 581736, 306037 or 311396), oil seal TC38608 (the original may be TC38607), circlip 702918 and a ‘one shot’ hub nut (which must be renewed each time the hub is removed).

Additional information

Brand	Daxara, Erde
Manufacturer	URB

MPN	311396 ALKO141 ERDEHN1 TC38608

Reviews

There are no reviews yet.

Be the first to review “Bearing Kit for RTN 911 and 912 Hub”

Further Assistance

Have a question about our Bearing Kit for RTN 911 and 912 Hub? Our sales team are here to help Monday to Friday 9am to 5.30pm. Why not call us on 01392 216336.

Should you prefer to email us, please use our product enquiry form.

Bearing Kit for RTN 911 and 912 Hub

Description

Additional information

Reviews

Further Assistance

Taper Roller Bearing 32005X

Alko Brake Shoe Kit 160×35 (for one Axle) 1213888

Seal 250 168 37 (42.85 63.5 9.52)

Taper Roller Bearing 32004X

COMPANY INFORMATION

USEFUL INFORMATION

COMPANY INFORMATION

USEFUL INFORMATION

WEBSITE CREDITS

Bearing Kit for RTN 911 and 912 Hub

Description

Additional information

Reviews

Further Assistance

Related products

Taper Roller Bearing 32005X

Alko Brake Shoe Kit 160×35 (for one Axle) 1213888

Seal 250 168 37 (42.85 63.5 9.52)

Taper Roller Bearing 32004X

COMPANY INFORMATION

USEFUL INFORMATION

COMPANY INFORMATION

USEFUL INFORMATION

WEBSITE CREDITS