Hub cap for Erde Hub

Removing the Daxara hub cap can be done by using either a wood or rubber mallet to tap the cap on the side at as much of an angle so as to move the cap away from the hub, this should be done while turning the hub slowly. The hub cap should start moving away from the hub and then come away completely. This can be done without damaging the cap but sometimes it's so stubborn that the cap can become dented and cannot be refitted and a new one is required. The cap can then be replaced, push in by hand as far as possible and the tap in the centre with a rubber mallet until fully home, this should leave about 14mm of the cap showing above the casting.